Shopping results for Air Gap Intake Manifold: compare Air Gap Intake Manifold prices by browsing products below and explore related searches Deluxe Double Six Dominoes, Blackberry Bold Cases Accessories, Cat5 Ab Switch

Edelbrock 7501 INTAKE -

Edelbrock 7501 INTAKE MANIFOLD

The Edelbrock Performer RPM Air-Gap Intake Manifold is manufactured from aluminum and given a natural finish. The exclusive Air-Gap design features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The runners are tuned up to move the power band 1, 000 RPM higher than Performer Air-Gap manifolds, from idle-5, 500 RPM up to 1, 500-6, 500 RPM. It also features nitrous bosses, rear water outlets and two distributor clamp locations.

  • Search:
  • Item ID: B000CN9164
  • Brand: Edelbrock
  • ASIN: B000CN9164
  • UPC: 085347075010
  • Part No: 7501
Edelbrock 7501 SBC Performer RPM Air Gap Intake Manifold -

Edelbrock 7501 SBC Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV

This listing is for an early (1986 and earlier) Small Block Chevy Intake Kit. Consisting of an Edelbrock Performer RPM Airgap Intake Manifold (Part #7501), Edelbrock Intake Manifold Gasket Set (Part # 7201), ARP Black Oxide Intake Manifold Bolt Set (Part # 134-2001), Permatex Black RTV (Part #82180) and Mr. Gasket Carburetor Stud Kit (Part # 59). We've put together a proven kit to take the guesswork out of choosing the right components for your early small block Chevy! Edelbrock Performer RPM Air Gap Intake Manifold. Part # 7501. RPM AIR-GAP (1500-6500 RPM) Designed for 1955-86 262-400 c.i.d. Chevrolet V8's, the award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks. For square-bore carburetors only. No provision for exhaust- heated chokes and no exhaust crossover. Not for 1987 and later...

  • Search:
  • Item ID: B073BKL438
  • Brand: Edelbrock
  • ASIN: B073BKL438
  • UPC: 018227485968
  • Part No: EDE7501K1
Assault Racing Products PC2025 Small Block Chevy Dual Plane Air Gap Polished Aluminum Intake 1500-6500 RPM -

Assault Racing Products PC2025 Small Block Chevy Dual Plane Air Gap Polished Aluminum Intake 1500-6500 RPM SBC

In our opinion these are not $400.00 show quality polished intakes. Flaws in the polish such as scuffs and marks will require more polishing to enhance the finish. This is a new polished aluminum dual plane intake for small block Chevy. 180° high rise design, big power over a wide RPM range. Has the open air area under the carb pad to help keep fuel mixture cool and improve power. Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would. These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part - the price! Intake works with 283-400 small blocks up to 1995. Includes special adapter bushings for the middle holes on the '87 to '95 heads. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover and are not EGR equipped. Manifold Specifications: Part Number: PC2025 RPM Range: 1500 - 6500 Intake Port Dimensions: 2.09" x 1.25"*1 Manifold Height: 4.65" NOTE (1) - port is intentionally le...

  • Search:
  • Item ID: B00S75GKF4
  • Color: Polished
  • Brand: Assault Racing Products
  • ASIN: B00S75GKF4
  • Part No: PC2025
289/302 SBF Eliminator Air Gap Intake Manifold, -

289/302 SBF Eliminator Air Gap Intake Manifold, Polished

The Speedway Motors Eliminator Performance Manifold has all the same great features as the Qualifier Manifolds, but with the addition of an open space underneath the plenum chamber. The gap underneath allows for a cooler air charge coming into the motor that results in a jump in performance and power. This style of intake manifold has become very popular over the years, as they are a proven design that puts the power to the ground! The Eliminator series is setup to run a standard square bore carb, as well as featuring nitrous bosses, four corner water ports and dual distributor tie downs. When looking for additional power, without sacrificing the streetability of your ride, look no further than the Eliminator Manifolds from Speedway Motors! 1500-6500 rpm range Open gap plenum design Fits 289/302 based Small Block Fits Ford applications.

  • Search:
  • Item ID: B07N7TYGGS
  • Brand: Speedway Motors
  • ASIN: B07N7TYGGS
  • Part No: 91611240-POL
Edelbrock 7561 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV - BBC Oval -

Edelbrock 7561 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV - BBC Oval Port

This listing is for an Intake Kit for the Big Block Chevy with Oval Port Heads Consisting of an Edelbrock Performer RPM Air Gap Intake Manifold (Part #7561), Edelbrock Intake Manifold Gasket Set (Part # 7203), ARP Black Oxide Intake Manifold Bolt Set (Part # 135-2001), Permatex Black RTV (Part #82180) and Mr. Gasket Carburetor Stud Kit (Part # 59) This intake works with square bore carburetors. We've put together a proven kit to take the guesswork out of choosing the right components for your performance Oval Port BBC Engine! Edelbrock Performer RPM Air Gap Intake Manifold. Part # 7561. RPM AIR-GAP 2-O (1500-6500 RPM) Designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. The RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street. For square bore carburetors only. No provision for exhaust heated chokes and no exhaust crossover....

  • Search:
  • Item ID: B073BMQMT1
  • Brand: Edelbrock
  • ASIN: B073BMQMT1
  • UPC: 018227485999
  • Part No: 7561K1
Edelbrock 7516 INTAKE -

Edelbrock 7516 INTAKE MANIFOLD

The Edelbrock Vortec RPM Air-Gap Intake Manifold is based on the powerful Performer RPM Vortec EDL-7116. This single four-barrel intake is designed for 1996 and later Vortec (L31) cast iron or the new Edelbrock E-Tec aluminum heads. The RPM air-gap manifold delivers outstanding performance using the same air-gap technology found in our race-winning Victor manifolds. This unique design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the RPM range. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. It includes rear water outlets, nitrous bosses and a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover. It accepts 1976 and later alternator and air-conditioning brackets for street installations and is for square-bore carburetors.

  • Search:
  • Item ID: B00062ZTZS
  • Brand: Edelbrock
  • ASIN: B00062ZTZS
  • UPC: 085347075164
  • Part No: 7516
Edelbrock 27014 INTAKE -

Edelbrock 27014 INTAKE MANIFOLD

The Edelbrock Performer EPS Intake Manifold features a low-rise, dual plane design with patented runner tuning and a 180 degree firing order. This combination boosts torque over a wide RPM range from idle to 5, 500 RPM. They deliver improved throttle response over stock intake and come in non-EGR (Exhaust Gas Recirculation) style.

  • Search:
  • Item ID: B000CN516I
  • Brand: Edelbrock
  • ASIN: B000CN516I
  • UPC: 085347270149
  • Part No: 27014
Edelbrock 7521 INTAKE -

Edelbrock 7521 INTAKE MANIFOLD

The Edelbrock Performer RPM Air-Gap Intake Manifold incorporates the same race-winning technology that's been used on Edelbrock Victor Series competition intakes for years. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. It includes nitrous bosses and has no provision for exhaust heated chokes and no exhaust crossover. Aftermarket 4-bbl carburetors are not compatible with Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. The runners are tuned to move the power band 1, 000 RPM higher than Performer Air-Gap manifolds, from idle-5, 500 RPM up to 1, 500-6, 500 RPM.

  • Search:
  • Item ID: B00062ZHS2
  • Brand: Edelbrock
  • ASIN: B00062ZHS2
  • UPC: 085347075218
  • Part No: 7521
289/302 SBF Eliminator Air Gap Intake Manifold, -

289/302 SBF Eliminator Air Gap Intake Manifold, Plain

The Speedway Motors Eliminator Performance Manifold has all the same great features as the Qualifier Manifolds, but with the addition of an open space underneath the plenum chamber. The gap underneath allows for a cooler air charge coming into the motor that results in a jump in performance and power. This style of intake manifold has become very popular over the years, as they are a proven design that puts the power to the ground! The Eliminator series is setup to run a standard square bore carb, as well as featuring nitrous bosses, four corner water ports and dual distributor tie downs. When looking for additional power, without sacrificing the streetability of your ride, look no further than the Eliminator Manifolds from Speedway Motors! 1500-6500 rpm range Open gap plenum design Fits 289/302 based Small Block Fits Ford applications.

  • Search:
  • Item ID: B07N7RRJ7T
  • Brand: Speedway Motors
  • ASIN: B07N7RRJ7T
  • Part No: 91611240-PLN
Assault Racing Products PC5026 for Small Block Chrysler/Plymouth/Dodge Dual Plane Satin Aluminum Intake 1500-6500 RPM SBM 318 340 -

Assault Racing Products PC5026 for Small Block Chrysler/Plymouth/Dodge Dual Plane Satin Aluminum Intake 1500-6500 RPM SBM 318 340 360

This is a new satin aluminum dual plane intake for small block 340/360 Chrysler / Plymouth / Dodge engines. Dual bolt pattern, fits '67-'03 including the newer 318/5.2L and 360/5.9L Magnum heads. Will also fit 273 and earlier 318 engines that have 4 barrel heads (heads on early 2 barrels have smaller port size). 180° high rise design, big power over a wide RPM range. For use with square bore style carbs. No provision for exhaust heated choke or exhaust crossover. Not EGR equipped. This intake has the open air area under the carb pad to help keep fuel mixture cool and improve power. Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would. These intakes are produced from steel molds to reduce core shift, have all the major features you would expect on the expensive ones such as an extra rear water passage, nitrous/injector bosses, and the best part - the price! Manifold Specifications: Part Number: PC5026 RPM Range: 1500 - 6500 Intake Port Dimensions: 2.16" x 1.08" Manifold Height: 5.50" Features: Satin Finish Dual pattern, works on early and the newer Magnum heads 180° dual plane high rise design for outstanding power from 1500 to 6500 RPM Open air gap under plenum for cooler ...

  • Search:
  • Item ID: B01BCNL16U
  • Color: Satin
  • Brand: Assault Racing Products
  • ASIN: B01BCNL16U
  • Part No: PC5026
Edelbrock 7562 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV - BBC Rectangle -

Edelbrock 7562 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV - BBC Rectangle Port

This listing is for an Intake Kit for the Big Block Chevy with Rectangle Port Heads Consisting of an Edelbrock Performer RPM Air Gap Intake Manifold (Part #7562), Edelbrock Intake Manifold Gasket Set (Part # 7202), ARP Black Oxide Intake Manifold Bolt Set (Part # 135-2001), Permatex Black RTV (Part #82180), and Mr. Gasket Carburetor Stud Kit (Part # 59) This intake works with square bore carburetors. We've put together a proven kit to take the guesswork out of choosing the right components for your performance Rectangle Port BBC Engine! Edelbrock Performer RPM Air Gap Intake Manifold. Part # 7562. RPM AIR-GAP 2-R (1500-6500 RPM) Designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads, the RPM Air-Gap intake manifold incorporates our race-winning technology. The open air space separates the runners from the hot engine oil, and as a result, the air/fuel mixture stays cooler for a denser charge and more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street. For square-bore carbs only. No provision for exhaust heated chokes and no exhaust crossover. Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro ARP Black Oxide Intak...

  • Search:
  • Item ID: B073BKQRCP
  • Brand: Edelbrock
  • ASIN: B073BKQRCP
  • UPC: 018227486002
  • Part No: 7562K1
Edelbrock 75224 RPM Air Gap Dual-Quad Intake - Air Gap Intake Manifold

Edelbrock 75224 RPM Air Gap Dual-Quad Intake Manifold


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Price: 539 591
Edelbrock 2601 Performer Air-Gap Series Intake - Air Gap Intake Manifold

Edelbrock 2601 Performer Air-Gap Series Intake Manifold


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Model: 2601
  • Color: Multicolor
  • Price: 298 359
Edelbrock 7564 RPM Air Gap 351-C Intake - Air Gap Intake Manifold

Edelbrock 7564 RPM Air Gap 351-C Intake Manifold


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Model: 7564
  • Color: Multicolor
  • Price: 411 496
Edelbrock 7576 RPM Air Gap Intake Manifold, Mopar - Air Gap Intake Manifold

Edelbrock 7576 RPM Air Gap Intake Manifold, Mopar 318,340,360


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Model: 7576
  • Color: Multicolor
  • Price: 370
Edelbrock 75614 RPM Air-Gap 2-0 Intake Manifold * NEW - Air Gap Intake Manifold

Edelbrock 75614 RPM Air-Gap 2-0 Intake Manifold * NEW *


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Model: 75614
  • Color: Multicolor
  • Price: 534
Aluminum Intake Manifold SBC 55-95 Dual Plane Air Gap Satin 350 383 400 - Air Gap Intake Manifold

Aluminum Intake Manifold SBC 55-95 Dual Plane Air Gap Satin 350 383 400 Chevy


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Category: Intake Manifold
  • Price: 181 USD
SBC Small Block Chevy Vortec Air Gap Aluminum Intake Manifold 350 - Air Gap Intake Manifold

SBC Small Block Chevy Vortec Air Gap Aluminum Intake Manifold 350 Satin


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Category: Intake Manifold
  • Price: 195 USD
SBC CHEVY ELIMINATOR POLISHED DUEL PLAIN AIR GAP ALUMINUM INTAKE MANIFOLD - Air Gap Intake Manifold

SBC CHEVY ELIMINATOR POLISHED DUEL PLAIN AIR GAP ALUMINUM INTAKE MANIFOLD #22025


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Category: Intake Manifold
  • Price: 235 USD
Dodge MOPAR Plymouth 340 360 Magnum Air Gap Dual Plane Aluminum Intake - Air Gap Intake Manifold

Dodge MOPAR Plymouth 340 360 Magnum Air Gap Dual Plane Aluminum Intake Manifold


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Category: Intake Manifold
  • Price: 259 USD
Edelbrock 7501 RPM Air Gap Intake SB Chevy w/ Free ARP Bolts and FelPro - Air Gap Intake Manifold

Edelbrock 7501 RPM Air Gap Intake SB Chevy w/ Free ARP Bolts and FelPro Gaskets


  • Search: Air Gap Intake Manifold
  • Item ID:
  • Category: Intake Manifold
  • Price: 286 USD

Edelbrock Intake Manifold Dyno Test :: Single Vs Dual + Air-Gap Vs Regular

Air Gap Intake Manifold

Edelbrock single plane (Victor Jr) vs dual plane (Air-Gap) intake manifolds on the same engine in a dyno test at Westech Performance. Plus a test of the Air-Gap vs Regular dual plane intake manifolds. This is an episode I edited.

Tags: Edelbrock,Performer,RPM,Air-Gap,Air,Gap,dual,pl...