Dodge Intake System

The K&N AirCharger 63-1564 air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-1564 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that mounts onto the inner fender. This allows cooler, denser air to be directed through a custom molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, socket set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

---

• Search:
• Item ID: B007ISGIOE
• Brand: K&N
• ASIN: B007ISGIOE
• UPC: 024844305725
Part No: 63-1564

Spectre air intake systems are designed to get the most horsepower and torque from your vehicle while they protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with all necessary boots, clamps and hardware for an OE fit and finish.

---

• Search:
• Item ID: B001FJZNVG
• Color: Red
• Brand: Spectre Performance
• ASIN: B001FJZNVG
• UPC: 089601993102
Part No: 9931

Can be installed in 30-45 minutes with simple hand tools; NO Drilling, NO Cutting, NO Fabrication Required! The Cold Air Intake System comes complete with everything necessary for installation, including comprehensive step by step instructions. AF-Dynamic Cold Air Intake Kit complete with high-flow air filter and aluminum heatshield with insulation mat. The intake kit not only increases power, but will also provide better engine response compared to your restrictive stock air intake box. The included reflective insulation mat material, when added to the heatshield, further reduces intake temperatures and heat soak from the engine bay. Features: · Replaces OEM filter and air box with 100% New Quality Parts! · Uses only top-quality stainless steel button head bolts, washers, locknuts and band clamps. · Uses only high quality silicone coupler, elbow and hoses “NOT CHEAP RUBBER” · Works with Original Equipment Manufacturer computer systems. · Helps engine to more efficiently draw in colder air, resulting in better throttle response and consistently higher horsepower output. · Improves up to 95% filtration efficiency over OEM paper filters. · Increases of 5 to 10 horsepower, 6 to 8 percent of Torque, and improved gas mileage of your vehicle. · Intense deep sporty sound...

---

• Search:
• Item ID: B01LE55CI4
• Brand: R&L Racing
• ASIN: B01LE55CI4
• UPC: 647409615024
Part No: 0915-DR-HS

K&N Cold Air Intake System 2009-2017 Ram 1500 5.7L Hemi V8, Thie Cold Air Intake replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-1561 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that directs cooler air into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

---

• Search:
• Item ID: B0765RCLFB
• Brand: K & N Air Intakes
• ASIN: B0765RCLFB
• UPC: 786830317180
Part No: KN63-1561

The aFe Power air intake system produces 5 max horsepower, 12lbs. x ft. torque and out-flowed the factory intake by 81%. Includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

---

• Search:
• Item ID: B004BR8DV6
• Brand: aFe Power
• ASIN: B004BR8DV6
• UPC: 802959503560
Part No: 54313421

K&N 63 Series AirCharger Performance Intake Kit replaces the vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable and reusable.

---

• Search:
• Item ID: B003CR2ILM
• Brand: K&N
• ASIN: B003CR2ILM
• UPC: 024844265180
Part No: 63-1561

Airaid Dry Filter Intake Systems are computer designed to give your engine maximum air flow, which means more horsepower, torque and improved performance. Every Airaid intake system is dyno tested and tuned to provide maximum performance and efficiency. By utilizing computer-aided design, Airaid Intake Systems offer unmatched fit, finish and lifetime warranty. Each Airaid SynthaMax intake provides superior air filtration, since it comes with an Airaid SynthaMax Dry Premium Filter featuring Airaid's exclusive filter technology that requires no oil. Fits 2011-2012 Dodge Charger, Dodge Challenger and Chrysler 300 3.6L, 5.7L, SRT8 6.4L.

---

• Search:
• Item ID: B007P2ESCC
• Brand: Airaid
• ASIN: B007P2ESCC
• UPC: 642046332105
Part No: 353-210

roush spectre 9938 pedal commander 1500 vararam outlaw ecodiesel 2014 ca9401 2015 cabin 2016 kn fram tga9401 cfm 2013 acoustic response 707 remote start 2500 2017 cool accessories cleaner exhaust 3500 2011 09 2012 2008 2002 05 07 08 hemi sb intakes owners manual lifetime california legal 03 oil assembly automotive kits an truck with aftermarket are red replacement offroad stock systems rams cone minder blackhawk jack box merch rack life brothers raid monster car 300

---

• Search:
• Item ID: B06X9DWZSX
• Brand: S&B
• ASIN: B06X9DWZSX
• UPC: 841372036682
Part No: 75-5094

This Stage-2 air intake system uses a 3-1/2" diameter black powder-coated aluminum tube for the intake tract, a massive 5-1/2" Pro DRY S air filter. The simple snap-in housing utilizes the factory lower air box for an easy installation. The 3-angle adaptor is used to speed up the air flow after the air filter for improved performance and throttle response. All of these combined produces 18 max horsepower, 23 lbs. x ft. torque and out-flowed the factory intake by 27%. 5-1/2" Conical Air Filter - This intake utilizes a huge, 5-1/2" conical Pro DRY S performance air filter for maximum flow. This 3-layer progressive, non-synthetic air filter provides maximum convenience. Top Mounted Heat Shield Design- aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. 3-Angle Adaptor- The 3-angle adaptor is used to speed up the air flow after the air filter for improved performance and throttle response. Hassle-Free Installation- This intake replaces the factory intake box and uses the factory inlet tube. All hardware and components are included for a hassle-free installation.

---

• Search:
• Item ID: B00C96U1A2
• Brand: aFe Power
• ASIN: B00C96U1A2
• UPC: 479160560509
Part No: 51-12402

Can be installed in 30-45 minutes with simple hand tools; NO Drilling, NO Cutting, NO Fabrication Required! The Cold Air Intake System comes complete with everything necessary for installation, including comprehensive step by step instructions. AF-Dynamic Cold Air Intake Kit complete with high-flow air filter and aluminum heatshield with insulation mat. The intake kit not only increases power, but will also provide better engine response compared to your restrictive stock air intake box. The included reflective insulation mat material, when added to the heatshield, further reduces intake temperatures and heat soak from the engine bay. Features: · Replaces OEM filter and air box with 100% New Quality Parts! · Uses only top-quality stainless steel button head bolts, washers, locknuts and band clamps. · Uses only high quality silicone coupler, elbow and hoses “NOT CHEAP RUBBER” · Works with Original Equipment Manufacturer computer systems. · Helps engine to more efficiently draw in colder air, resulting in better throttle response and consistently higher horsepower output. · Improves up to 95% filtration efficiency over OEM paper filters. · Increases of 5 to 10 horsepower, 6 to 8 percent of Torque, and improved gas mileage of your vehicle. · Intense deep sporty sound...

---

• Search:
• Item ID: B01LE56Z58
• Brand: R&L Racing
• ASIN: B01LE56Z58
• UPC: 647409614874
Part No: 1115-DC8-HS

---

• Search: Dodge Intake System
• Item ID:
• Model: AIP-2-HS-300C05HEMI-BKBK
• Color: White
• Price: 58 73

---

• Search: Dodge Intake System
• Item ID:
• Model: AIP-2-HS-RAM03L6-BKBK
• Color: White
• Price: 62

---

• Search: Dodge Intake System
• Item ID:
• Model: AIP-2-HS-RAM0957-BKBK
• Color: White
• Price: 54 68

---

• Search: Dodge Intake System
• Item ID:
• Price: 54

---

• Search: Dodge Intake System
• Item ID:
• Model: AIR-302-106
• Price: 295 361